Samsung Dryer Error Codes: What They Mean and How to Fix Them

Samsung dryers are designed to be highly efficient and user-friendly, but like all appliances, they can encounter issues from time to time. When a problem arises, your Samsung dryer will display an error code to help you identify the issue. Understanding these error codes can save you time and help you determine if the problem requires professional repair. Below is a comprehensive list of Samsung dryer error codes, along with potential causes and solutions.

1. Error Code: bE

Meaning: Button stuck error.
Cause: This error occurs when one of the buttons on the control panel is stuck.
Solution: Check if any button is stuck or jammed. If so, gently free the button. If the error persists, the control board may need to be replaced.

2. Error Code: dC

Meaning: Door open error.
Cause: The dryer door is not properly closed.
Solution: Ensure the dryer door is completely shut. If the door seems closed but the error persists, the door switch may be defective and might require replacement.

3. Error Code: HE

Meaning: Heating error.
Cause: This code indicates that the dryer is not heating properly.
Solution: Check for any obstructions in the vent. If the vent is clear but the error continues, there could be an issue with the heating element, thermostat, or thermal fuse, requiring professional attention.

4. Error Code: FE

Meaning: Power frequency error.
Cause: This error is linked to fluctuations in the power supply frequency.
Solution: Confirm that the power supply is stable. If your area frequently experiences voltage changes, this could be the root cause. A technician can check for any deeper electrical issues in the dryer.

5. Error Code: tS / tO

Meaning: Temperature sensor error.
Cause: This error signifies that the temperature sensor (thermistor) is defective or disconnected.
Solution: Inspect the temperature sensor and ensure it’s securely connected. If the error persists, the sensor may need replacement.

6. Error Code: 5E

Meaning: Exhaust vent error.
Cause: The dryer has detected a problem with airflow in the exhaust vent.
Solution: Clean the lint filter and inspect the exhaust vent for any blockages. Restricted airflow can also cause the dryer to overheat, leading to this error.

7. Error Code: dF

Meaning: Door circuit failure.
Cause: This code indicates a failure in the door circuit, likely due to a malfunctioning door switch.
Solution: Test the door switch using a multimeter. If the switch is defective, it will need to be replaced.

8. Error Code: tE

Meaning: Thermistor error.
Cause: The dryer’s thermistor is reporting incorrect temperatures or has failed.
Solution: Inspect the thermistor for damage or disconnection. A faulty thermistor will require replacement.

9. Error Code: Et

Meaning: Control board error.
Cause: This error suggests a communication failure between different parts of the dryer’s control board.
Solution: Unplug the dryer for 10 minutes to reset the system. If the error persists, the control board may need replacement, which should be handled by a professional.

10. Error Code: 9C1

Meaning: Low voltage error.
Cause: The voltage supplied to the dryer is insufficient for normal operation.
Solution: Check your home’s electrical system to ensure the voltage meets the dryer’s specifications. A professional technician may need to inspect the internal power supply components.

11. Error Code: hE / HC

Meaning: Heating error.
Cause: The dryer is not able to heat correctly, typically due to a problem with the heating element, thermistor, or control board.
Solution: First, check for airflow issues such as blocked vents. If no blockage is found, the heating element, thermostat, or control board may need to be replaced.

12. Error Code: OE

Meaning: Overheating error.
Cause: This code appears when the dryer becomes too hot.
Solution: Clean the lint filter and check for any blockages in the vent system. If the error remains, the thermal fuse or thermostat may need attention from a professional.

13. Error Code: AC

Meaning: Communication error.
Cause: The dryer is unable to communicate properly between its internal systems.
Solution: Unplug the dryer for 10 minutes to reset it. If the error reappears, a professional inspection of the control board is recommended.

14. Error Code: E3

Meaning: Drum motor error.
Cause: The dryer is experiencing trouble turning the drum, often due to motor failure or obstruction.
Solution: Check if the drum is physically obstructed. If not, the drum motor might be failing and will need replacement.

15. Error Code: Clg

Meaning: Clogged vent error.
Cause: The dryer is detecting a clogged exhaust system.
Solution: Inspect and clean the vent system thoroughly. Restricted airflow due to a clogged vent can cause performance issues and potential overheating.

When to Call a Professional

While some Samsung dryer error codes can be resolved with simple troubleshooting, others may require the expertise of a professional technician. Issues related to the heating element, control board, or motor often need specialized knowledge and tools to diagnose and repair. Attempting to fix these without proper expertise may lead to further damage to your appliance.

If you encounter an error code that persists or is beyond your comfort level to fix, it’s always best to contact a trusted repair service.

Contact A-Repair for Expert Samsung Dryer Repairs

If you’re experiencing any of these error codes or any other issues with your Samsung dryer, the experts at A-Repair are here to help. We specialize in diagnosing and repairing a wide range of Samsung appliances, including dryers. Our experienced technicians are available throughout Toronto and the GTA, providing fast, reliable, and professional service.

For all your Samsung dryer repair needs, contact A-Repair today:

Phone: (647) 333-3350
Location: 29 Stevenharris Dr, Toronto, ON M9C 1T9

Website: https://a-repair.com

Let A-Repair restore your dryer to perfect working condition and get your laundry routine back on track!