Common Whirlpool Fridge Error Codes

Error Code: PO (Power Outage)

• What It Means: This error code appears when the refrigerator experiences a power outage.
• What To Do: You can clear this code by pressing any button on the control panel. If the fridge isn’t cooling properly after the outage, check your circuit breaker or contact a professional to inspect the electrical connection.

Error Code: E1 (Thermistor Failure)

• What It Means: This code signals an issue with the refrigerator’s thermistor, a component responsible for measuring temperature inside the unit.
• What To Do: Unplug the fridge for a few minutes and plug it back in. If the issue persists, the thermistor may need to be replaced. This is a task best handled by a professional, as the thermistor is a critical part of the temperature regulation system.

Error Code: E2 (Compressor Sensor Failure)

• What It Means: This error indicates a problem with the compressor sensor. The compressor is the heart of your fridge’s cooling system, and this error could lead to inefficient cooling.
• What To Do: Reset the fridge by unplugging it for 5-10 minutes. If the error reappears, you will likely need to have the compressor sensor replaced or serviced by a technician.

Error Code: d (Defrost System Malfunction)

• What It Means: This error shows up when there’s a problem with the defrost system, which is responsible for keeping the fridge and freezer free of ice buildup.
• What To Do: Check for visible signs of ice buildup and clear it manually if possible. If ice continues to accumulate, the defrost heater, timer, or thermostat may be faulty and need professional repair or replacement.

Error Code: F1 (Freezer Temperature Sensor Fault)

• What It Means: This code indicates that the freezer’s temperature sensor isn’t functioning correctly.
• What To Do: Similar to other sensor-related errors, unplug the unit and restart it after a few minutes. If the issue persists, it’s time to replace the sensor.

Error Code: F2 (Refrigerator Temperature Sensor Fault)

• What It Means: This is similar to the F1 error but pertains to the refrigerator compartment.
• What To Do: Inspect the temperature settings in the fridge and reset the system. If the error continues, it’s likely that the sensor needs to be checked or replaced by a technician.

Error Code: Fd (Fan Motor Problem)

• What It Means: This error suggests an issue with the fan motor, which circulates air inside the fridge and freezer to maintain even cooling.
• What To Do: You can try resetting the fridge, but if the error persists, the fan motor may need to be repaired or replaced by a professional.

Error Code: F5 or F6 (Main Control Board Failure)

• What It Means: These codes indicate that there is a problem with the main control board, which manages the overall operation of your refrigerator.
• What To Do: Since the control board is a complex and integral part of the fridge’s system, this error requires professional attention. Attempting to fix the control board without the proper knowledge can result in further damage to the appliance.

Error Code: CF (Communication Failure)

• What It Means: This error appears when there is a disruption in communication between various components of the refrigerator.
• What To Do: This is often an electrical issue, so the first step is to unplug the fridge and restart it after a few minutes. If the error persists, you may need a technician to inspect the wiring and internal communication systems.

Error Code: dr (Door Ajar)

• What It Means: The refrigerator door has been left open for an extended period.
• What To Do: Make sure all doors are fully closed. If you continue to see this error even after closing the doors, the door seal or sensor may be faulty and require repair.

Error Code: H1 (Refrigerator Overheating)

• What It Means: This indicates that the refrigerator is too warm.
• What To Do: Check to make sure the fridge is properly plugged in and that the cooling system is functioning. If the temperature doesn’t drop back to normal after resetting, there could be an issue with the cooling mechanism or thermostat, both of which should be examined by a technician.

What to Do When Error Codes Appear

While some minor issues can be addressed with a quick reset or cleaning, others may require more specialized attention. It’s important to remember that if your Whirlpool fridge is displaying an error code that doesn’t go away, this is a sign that there may be an underlying mechanical or electrical issue. In these cases, DIY solutions may not be enough, and seeking professional help will save you time, effort, and potentially the cost of a full replacement.

Preventing Error Codes

Regular maintenance can prevent many common refrigerator issues. Ensure that your fridge is set at the correct temperature (typically between 37°F and 40°F for the fridge and 0°F for the freezer). Regularly clean the condenser coils and ensure that there is proper airflow around the unit. Also, don’t overload your fridge or freezer, as this can strain the appliance and lead to component failure.

When to Call A-Repair

If your Whirlpool fridge is consistently displaying error codes or isn’t working properly despite resetting the system, it’s time to call a professional. A-Repair offers trusted and professional Whirlpool Fridge Repair Services in Toronto and the GTA. Our experienced technicians are well-versed in diagnosing and repairing Whirlpool appliances, ensuring your fridge is back to optimal performance in no time.

Don’t let a simple error code compromise your appliance. Call A-Repair today for fast and reliable fridge repair services!